| Application | General | Place of Origin | Shenzhen, China |
|---|---|---|---|
| Power | Pneumatic | Customized support | OEM, ODM |
| Warranty | 3years | Model Number | 2"~24" |
| Temperature of Media | Low Temperature, Medium Temperature | Brand Name | ICV VALVE |
| Media | Water | Product name | Knife Gate Valve |
| Body material | Cast Lron.Carbon Steel Stainess Material | Disc | SS201/SS304/SS316 |
| Standard | ANSI BS DIN JIS | Working pressure | 0.6-1.6Mpa |
| Color | Customized Color |
Technical Parameters
| Parameter | Specification |
|---|---|
| Model | PNKGV-CI-SS |
| Body Material | Cast Iron |
| Nominal Pressure | 1.0 MPa (10 bar) |
| Nominal Diameter | DN50 to DN600 |
| Connection Type | Wafer |
| Actuator Type | Pneumatic |
| Sealing Material | EPDM, NBR, PTFE |
| Operating Temperature | -10°C to 80°C |
| Medium | Slurry, pulp, wastewater, chemicals |
| End Connection | ANSI B16.5, DIN, JIS |
| Air Supply Pressure | 0.4 - 0.7 MPa |
| Control Signal | 4-20mA, 0-10V |
| Protection Class | IP65 |
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Valve does not open/close | Air supply failure | Check and restore air supply |
| Leakage | Worn or damaged seals | Replace seals |
| Actuator malfunction | Pneumatic fault or leakage | Inspect and repair or replace actuator |
| No response to control signal | Faulty wiring or control system | Verify wiring and control system integrity |
Product Showcase
