pneumatic knife gate valve

  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve
  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve
  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve
  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve
  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve
  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve
  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve
  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve
  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve
  • Pneumatic device 4-inch ductile iron soft sealed one-way  PN10/16  knife gate valve

Pneumatic device 4-inch ductile iron soft sealed one-way PN10/16 knife gate valve

Pneumatic device 4-inch ductile iron soft sealed one-way PN10/16 knife gate valve

ApplicationslurryPlace of OriginShenZhen, China
PowerPneumaticCustomized supportOEM, ODM
Warranty3 yearsModel Number2"-24"
Temperature of MediaLow TemperatureMediaOil
TypeGate ValvesBody materialDuctile Iron/Cast Iron GGG50
ColorCustomized ColorUseWater Drainge
Working pressurePN10/16Disc Material316 CF8M


Product Overview

This valve is designed for reliable performance in various industrial applications, featuring a soft seal for tight closure and a pneumatic actuator for automated operation.

Features

  • Pneumatic actuator for automated control
  • Ductile iron construction for durability
  • Soft seal for tight closure and minimal leakage
  • One-way flow design
  • Suitable for a range of applications

Technical Specifications

ParameterSpecification
Valve TypeKnife Gate Valve
Body MaterialDuctile Iron
OperationPneumatic
Connection TypeFlanged
Pressure RatingPN10/16
Temperature Range-10°C to 80°C (14°F to 176°F)
Size4 Inch (DN100)
Seal MaterialSoft Seal (e.g., EPDM, NBR)
Leakage RateMinimal leakage

Installation Instructions

  1. Preparation: Ensure the pipeline is clean and free from debris. Verify flange compatibility and ensure the valve is suitable for the intended application.

  2. Mounting: Align the valve with the pipeline flanges. Use appropriate gaskets and bolts to secure the valve. Tighten bolts in a criss-cross pattern for even pressure distribution.

  3. Pneumatic Connection: Connect the pneumatic actuator to the air supply according to the manufacturer's specifications. Ensure all connections are secure and leak-free.

  4. Inspection: Test the actuator to ensure smooth operation and check for any obstructions in the valve.

Operation Guidelines

  • Opening/Closing: Use the control system to operate the pneumatic actuator for opening and closing the valve.
  • Flow Control: Ensure the valve is fully open or closed to prevent partial obstruction and ensure optimal flow control.

Maintenance

  • Regular Inspection: Perform regular inspections for signs of wear or damage. Ensure the actuator and valve components are in good condition.
  • Seal Maintenance: Inspect seals periodically and replace if necessary to maintain tight sealing and prevent leakage.
  • Cleaning: Keep the valve and actuator clean and free from external contaminants to ensure smooth operation.

Safety Precautions

  • Always disconnect the air supply before performing any maintenance or inspection.
  • Use appropriate personal protective equipment (PPE) during installation and maintenance.
  • Ensure all personnel are trained in valve operation and safety protocols.

Troubleshooting

IssuePossible CauseSolution
Valve does not open/closeAir supply issue or obstructionCheck air supply and clear obstruction
LeakageWorn or damaged sealReplace the seal
Actuator malfunctionPneumatic faultInspect connections and air lines


Product Show

12345

send message to us now!

Any questions please leave us a message.